I've been working on our Space Invaders Deluxe boardset this weekend, and the Motherboard had a missing ROM chip in 'G' so I have burned new 2716s for all of the ROM spaces 'H', 'G', 'F', 'E' and 'D'
There seems to be conflicing information as to whether boards wired for original ROM 9316B chips are directly compatible with 2716s or as to whether the motherboard jumpers need to be changed?
From the Midway manual it states the following:
[font="Courier New, Courier, mono"] ** ROM TYPE STRAPPING **
-------------------------------------------------------------------------------
PROM | MFG | S6a | S6b | S6c | S5 | S3 | S2 | S1 | | DSIF |
EPROM | |PIN 15|PIN 14|PIN 13|PIN 20|PIN 19|PIN 21|PIN 22|PIN 24|NEEDED |
ROM | | | | | | | | | | |
-------------------------------------------------------------------------------
27581 | AMD | AD10 | AD11 | AD12 | COM | +5V | COM | AD9 | +5V | NO |
-------------------------------------------------------------------------------
2708 | INTEL | AD10 | AD11 | AD12 | COM | +12V | +5V | AD9 | +5V | NO |
-------------------------------------------------------------------------------
2716 | TI | AD11 | AD12 | AD14 | AD10 | +12V | +5V | AD9 | +5V | NO |
-------------------------------------------------------------------------------
9316 | G.I. | AD11 | AD12 | AD14 | COM | AD10 | COM | AD9 | +5V | NO |
-------------------------------------------------------------------------------[/font]
So it looks like I need to change my jumper wiring for it's current 9316 wiring (checked and it is in this configuration) to the 2716 one.
Anyone verify for me that this is true?
Also, when testing the Motherboard, is it possible to test with JUST the Motherboard and the Test Rom in 'H'?
Just might be easier to go from untested to working that way
Also if anyone has a missing spare 'G' ROM the ones I have are:
H - Space Invaders H
G - <missing>
F - 9316B-0886
E - 9316B-0887
D - 9316B-0888
Thanks in advance as always!
Judder2014-01-29 16:51:28
There seems to be conflicing information as to whether boards wired for original ROM 9316B chips are directly compatible with 2716s or as to whether the motherboard jumpers need to be changed?
From the Midway manual it states the following:
[font="Courier New, Courier, mono"] ** ROM TYPE STRAPPING **
-------------------------------------------------------------------------------
PROM | MFG | S6a | S6b | S6c | S5 | S3 | S2 | S1 | | DSIF |
EPROM | |PIN 15|PIN 14|PIN 13|PIN 20|PIN 19|PIN 21|PIN 22|PIN 24|NEEDED |
ROM | | | | | | | | | | |
-------------------------------------------------------------------------------
27581 | AMD | AD10 | AD11 | AD12 | COM | +5V | COM | AD9 | +5V | NO |
-------------------------------------------------------------------------------
2708 | INTEL | AD10 | AD11 | AD12 | COM | +12V | +5V | AD9 | +5V | NO |
-------------------------------------------------------------------------------
2716 | TI | AD11 | AD12 | AD14 | AD10 | +12V | +5V | AD9 | +5V | NO |
-------------------------------------------------------------------------------
9316 | G.I. | AD11 | AD12 | AD14 | COM | AD10 | COM | AD9 | +5V | NO |
-------------------------------------------------------------------------------[/font]
So it looks like I need to change my jumper wiring for it's current 9316 wiring (checked and it is in this configuration) to the 2716 one.
Anyone verify for me that this is true?
Also, when testing the Motherboard, is it possible to test with JUST the Motherboard and the Test Rom in 'H'?
Just might be easier to go from untested to working that way
Also if anyone has a missing spare 'G' ROM the ones I have are:
H - Space Invaders H
G - <missing>
F - 9316B-0886
E - 9316B-0887
D - 9316B-0888
Thanks in advance as always!
Judder2014-01-29 16:51:28