I have a Double Dragon II board that plays fine but is exhibiting some graphics corruption (tiny lines on title screen and down the vertical edges of some sprites), so I pulled all the ROMs and went to verify them against MAME/Winromident. The output from MAME confused me...
-----------------------------------------------------------------------------------------------------------------
Identifying C:UsersSonyDesktopROM DumpsBoard PullsDouble Dragon II Bootleg....
A-1.BIN = 26a8-0.bin ddragon2u Double Dragon II - The Revenge (US)
A-10.BIN NO MATCH
A-11.BIN NO MATCH
A-2.BIN = 26ae-0.bin ddragon2 Double Dragon II - The Revenge (World)
= 26ae-0.bin ddragon2j Double Dragon II - The Revenge (Japan)
= 26ae-0.bin ddragon2u Double Dragon II - The Revenge (US)
A-3.BIN NO MATCH
A-4.BIN NO MATCH
A-5.BIN NO MATCH
A-6.BIN NO MATCH
A-7.BIN NO MATCH
A-8.BIN NO MATCH
A-9.BIN = scxgm10a.bin sc2scshxgman Super Cash X (Concept) (Gamesman Hardware)
B-12.BIN NO MATCH
B-13.BIN NO MATCH
B-14.BIN NO MATCH
B-15.BIN NO MATCH
B-16.BIN NO MATCH
B-17.BIN NO MATCH
B-18.BIN NO MATCH
B-19.BIN NO MATCH
B-20.BIN NO MATCH
B-21.BIN NO MATCH
B-22.BIN NO MATCH
B-23.BIN NO MATCH
B-24.BIN NO MATCH
B-25.BIN NO MATCH
B-26.BIN NO MATCH
B-27.BIN NO MATCH
So only 2 out of 27 ROMs could be identified?? And as for A-9...
The game plays OK so what is most likely here?
[list type=decimal][*]I've dumped the ROMs incorrectly (don't see how?)[*]The data in all but two of them has corrupted enough to be unidentifiable[*]I have an unknown board (unlikely)[*]Something else[/list type=decimal]
Also, how can I replace them if I wanted to? On one PCB layer the ICs are labelled as the "A" files above, on the other they just have the number (see image). Without a schematic/layout, how would I know what ROM goes where? The PCB has IC numbers by the sockets but don't know how that will help me here.
-----------------------------------------------------------------------------------------------------------------
Identifying C:UsersSonyDesktopROM DumpsBoard PullsDouble Dragon II Bootleg....
A-1.BIN = 26a8-0.bin ddragon2u Double Dragon II - The Revenge (US)
A-10.BIN NO MATCH
A-11.BIN NO MATCH
A-2.BIN = 26ae-0.bin ddragon2 Double Dragon II - The Revenge (World)
= 26ae-0.bin ddragon2j Double Dragon II - The Revenge (Japan)
= 26ae-0.bin ddragon2u Double Dragon II - The Revenge (US)
A-3.BIN NO MATCH
A-4.BIN NO MATCH
A-5.BIN NO MATCH
A-6.BIN NO MATCH
A-7.BIN NO MATCH
A-8.BIN NO MATCH
A-9.BIN = scxgm10a.bin sc2scshxgman Super Cash X (Concept) (Gamesman Hardware)
B-12.BIN NO MATCH
B-13.BIN NO MATCH
B-14.BIN NO MATCH
B-15.BIN NO MATCH
B-16.BIN NO MATCH
B-17.BIN NO MATCH
B-18.BIN NO MATCH
B-19.BIN NO MATCH
B-20.BIN NO MATCH
B-21.BIN NO MATCH
B-22.BIN NO MATCH
B-23.BIN NO MATCH
B-24.BIN NO MATCH
B-25.BIN NO MATCH
B-26.BIN NO MATCH
B-27.BIN NO MATCH
So only 2 out of 27 ROMs could be identified?? And as for A-9...
The game plays OK so what is most likely here?
[list type=decimal][*]I've dumped the ROMs incorrectly (don't see how?)[*]The data in all but two of them has corrupted enough to be unidentifiable[*]I have an unknown board (unlikely)[*]Something else[/list type=decimal]
Also, how can I replace them if I wanted to? On one PCB layer the ICs are labelled as the "A" files above, on the other they just have the number (see image). Without a schematic/layout, how would I know what ROM goes where? The PCB has IC numbers by the sockets but don't know how that will help me here.