I'm having a bit of trouble with my Taito Plotting board. Whenever it boots I get these weird sprites dancing all around the screen. I've tried all the usual things like soaking it in petrol and then setting fire to it, putting it in the oven for 3 hours at gas mark 8, putting it in the freezer for 2 years, driving over it repeatedly with my car, etc, but nothing seems to help. I've removed all the chips and replaced them with McCain oven chips in the hope that that may help but still no joy. I've checked the 5v line and it's a little high at just over 762.8v so I wonder if that could be anything to do with it?
What do you experts on the 'VAC think I should do to cure this crazy board?
Have a look at that video and see if you can figure out WTF the problem is?
What do you experts on the 'VAC think I should do to cure this crazy board?
Have a look at that video and see if you can figure out WTF the problem is?