WGK4613 Focus

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Got a WG K4613 from a friends Defender on the bench. I have it working but it's really not a great picture. To start us off, is there anything I can do to improve the focus? It seems a bit sh*t to put it mildly.

Please don't say "cap kit" - I don't believe in them because in the 15 years I've been working on this stuff, not once has a cap kit actually solved the problem in hand so they have always just been a waste of time and money.

Of course I am more than happy to replace caps if they need it and someone can point me in the direction of which caps deal with focus (if any!) as opposed to just blindly keeping RS / Farnell in business.

Ta.
 

obcd

Active member
Credits
3,830CR
The first obvious thing to check is the focus potmeter that is usually part of the THT. It might not improve things, but you should clearly see the focus change when you adjust that potmeter. (Indicating that the focus voltage is indeed adjustable) If a picture tube had long burning hours, it becomes less bright. This can be compensated by turning up the screen voltage a bit, or driving the color gun's a bit further (RGB gain). A problem that arises when doing this is the sharpness of the picture (the focus). The only possible solution I can see in such case is a rejuvenation of the Picture Tube. Some people say this just works for a couple of weeks (months maybe) and is only good for preparation of a machine before you sell it. (If you don't care about who buys it and simply want to get maximum profit out of it.) Others say it gives a spectacular improvement. I remember our first color tv that had a bad picture tube and would add myself to the first group. An indication of a picture tube on it's end is the fact that the picture becomes better after half an hour of warming up.

Slight vibrations of the picture in horiziontal or vertical direction can ruin your sharpness as well and can be caused by bad capacitors. Basically the only way you can rule out the monitor chassis is by replacing it with a known good chassis. If that doesn't work, it's your picture tube.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Thanks guys. I'll check that pin / connection. I can always hope
smiley1.gif


Unfortunately though the tired old tube description does sound likely. There's quite significant Defender burn so it's the original monitor and I can get the focus a bit better with screen and black level adjustment but then it's a little too dark.

Provided I have the correct adapter then I don't mind getting some reading off the rejuvenator but given its not my monitor I'd be reluctant to actually try and boost it. I'm aware that if you're unlucky it can be kill or cure and while I've not had one die on me yet, this IS at least a working monitor at the moment even if it does like a bit crap.
 
Top