What power source for bartop?

Mr20to5

Active member
vacBacker
Feedback
1 (100%)
Credits
1,366CR
Hi guys,

Considering scratch building a bartop for my kids to play on (hell, who am I kidding! )

Anyway, no issues with the carcass, would probably use a flat screen for ease which would need it's own mains power? but what are my options for powering a jamma board? Multi game board probably.

Can anyone please point me in the direction of a correct transformer or suchlike?

Thanks in advance.

Neil
 

FanDabbyDozy

Active member
Feedback
22 (100%)
Credits
170CR
I would use one like this
smiley4.gif


http://www.arcadeworlduk.com/products/Black-Arcade-JAMMA-Power-Supply.html
 

obcd

Active member
Credits
3,830CR
Depends on the board you will install. Real arcade hardware pcb's are very power hungry. That's why the 5V is adjustable to compensate for the cable losses between the supply and the board itself. If you install a "xx in one" module, it will be much more forgiving on it's supply, so a PC supply could work. A modern ATX supply has some 3V3 outputs that aren't used in a jamma setup. You will need to connect the "power on" to gnd to ensure the supply delivers it's output voltages. So basically, it will be less efficient due to the unused 3V3 outputs.

An older AT style supply is a better solution as it lacks the 3V3 outputs. Some arcade machines even use such a supply. The only difference with a normal pc supply is that the 5V is also adjustable with a potmeter mounted on the case and accessible without opening that case.
 

ZedEx48K

8-Bit
Feedback
2 (100%)
Credits
1,423CR
Unless you are running one of those multi game things like a blue elf, I can't see you fitting a jamma board inside a bartop, and given that I would chose to use a PC instead.
 

Mr20to5

Active member
vacBacker
Feedback
1 (100%)
Credits
1,366CR
Hi Guys, thanks for the suggestions and concerns above. I appreciate your knowledge and help.

@ZedEx48K - I may have been slightly misleading, it will be a little bigger than a bartop, and would probably have a vertical 19-1 multi board or similar in it.

As for the difference between the official jamma PSU or hacking a PC - I think I will start the build first, confident in being able to build the shell, then post again for suggestions as to what best to fill it with, as I go along.

Until then.

Thanks.
 

Mr20to5

Active member
vacBacker
Feedback
1 (100%)
Credits
1,366CR
Hi guys,
So the build is coming along (seperate thread on here for this if reference needed), so it's time to start buying some goodies to fill the insides with and testing them prior to sorting the fittings and fixtures.

And it is here, once more that I turn for help - a problem shared and all that.....

So I have already acquired a 15" Dell monitor which has it's own power source and VGA port to hook directly to the 60in1 game board that I am soon to acquire. This will obviously need it's own power and I am happy with the PSU linked above by FanDabbyDozy, unless anyone has a better/cheaper plan. Other sites seem to sell one for half the price (from China) but always out of stock?

Also needing power will be the marquee light (probably some under cabinet lighting with mains supply - but again open to suggestions both to type of light and power source - could I hook this up tot he PSU as well?)

Due to the lack of air inside the cab, I'm thinking it will need a fan of some sort - again suggestions
welcome, but really trying to work out whether if I got a suitable PC type one, I could hook this up to the PSU also? If so could someone please post a link to the right one?

Then lastly, I will need a speaker as the monitor doesn't have one, so what are my options and again, how can I power it?

That's it for now peeps, I await your answers with unbridled excitement and I apologise in advance for starting something that I have no idea how to finish !!!
smiley36.gif


PS: Please remember that whilst I may be able to cut a bit of wood (rather nicely) and play my own cabs (evenbeen known to fix them a little), I STILL AM A COMPLETE NOOB AND ELECTRICITY VIRGIN AND NEED ANY REPLIES IN VERY VERY BASIC ENGLISH.
smiley9.gif


Thanks guys.

Neil.
 

phillv85

Active member
Feedback
8 (100%)
Credits
490CR
I'd use this PSU: http://arcadejapan.co.uk/Min-Dong-MD-9916A-JAMMA-Arcade-Switching-Power-Supply

As for speakers, they just need connecting to the JAMMA harness, no separate power
smiley1.gif
 
Top