Williams Screw Size

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Can anyone tell me the screw size of the screws used to fix Williams PCBs to their metal plate?

Size-wise they appear to be M4, but the guy in the shop indicated there were something like 13 different thread sizes / pitches / types that it could be, and the ones I just picked up don't seem to be right.

It's also entirely possible of course that they are in fact imperial too!

Just need to know what size screws to buy as I have none so need about 24 of them. Thx.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,058CR
Ermm...

Not overly! I'll have to investigate. But thanks for that. At least I know what they should be, even if I have no idea what it means
smiley36.gif
 

pooman2084

Be Attitude For Gains!
vacBacker
Feedback
26 (100%)
Credits
1,886CR
They are imperial, but I bought about 1000 of them from a hardware store sale a few years back, so you're in luck! The only downside is that the screws are about 3 mm too long, but I simply cut the ends off and they worked well. PM me your address and I'll pop some in the post.
 
Top