Wiring loom

Mr20to5

Active member
vacBacker
Feedback
1 (100%)
Credits
1,366CR
Hi guys

I'm wanting to redo the wiring loom for the control panel in my NAC. Mainly beacause the current one is a little hacked and I want to have a nice new one.

Is there anywhere I can buy a handful of different coloured lengths of wire suitable for this, from? Either commercially or from someone on here.

Thanks in advance.

Neil
 

Rone

Active member
Feedback
4 (100%)
Credits
90CR
for stuff like this, we use different colored wires from an old model3 racer wiring loom. there are a Chance you only Need to remove the Pins in the amp up connectors, and put then in the right new ones in your mashine... or buy Pins, and crimp them self with this old wires, so you have same wires, sega uses...
 
Top