Xevious background Issue

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Hello All,

I acquired a Xevious PCB recently. After doing some work on the PCB it now boots fine, however, there is an issue with the backgrounds. There's probably one or more faulty traces / connections on the PCB. On first boot the backgrounds aren't correct. Let it warm up a bit and the backgrounds slowly begin to appear until they are fully there, the Title screen logo is messed up though, which I think is linked to the background generation.

Could anyone let me know which ROMs are responsible for the background generation please? Would like to save myself some major time - it's going to be awkward as it is.

Thanks for any help.

DSCF9063.JPG


DSCF9064.JPG


DSCF9065.JPG


DSCF9067.JPG


DSCF9068.JPG


It usually takes a couple of minutes for the all the background to appear, except for the Title logo.

jonhughes2016-08-26 12:45:13
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Oh heck, schoooool boy error - thought I'd repaired everything. There were so many repairs to this PCB. Missing ground from snapped pin on custam XVI-7.

Now fixed.
 

jonhughes

Active member
vacBacker
Feedback
52 (100%)
Credits
1,156CR
Thanks,
it was not a pleasant one though.

5 dead customs, probably 12 snapped pins to re-solder back on and one casing to dremmel after the pin snapped at the casing wall.

Very pleased to add this to the Namco collection.
 
Top