Zac invaders sound

PhilT

Active member
vacBacker
Credits
154CR
Hi

Does anyone know how the sound effects are produced on a Zacc The Invaders board. Mine is working but the sounds arnt right.

The dum dum effect as the invaders move is fine and the saucer sound works but the missile shot is just noise and the ship explosion sound is missing.

I figured it would work the same as a Space Invaders board where every sound has its own bit of circuit and op amp but that appears not to be the case here and there isn't much info on these boards.

The saucer sound seems to be made in the same way with a separate daughter board but not the others so I am a bit stuck. Thanks.
 

bbz149

Active member
vacBacker
Feedback
26 (100%)
Credits
1,608CR
Ill have to look at my board as I had a similiar problem! I changed one of the 8pin IC's on the little Daughter board. Very simple problem to fix!
 

PhilT

Active member
vacBacker
Credits
154CR
Ah ok thanks. I worked out that it used the same sound chip for the saucer sound with all the resisters and caps around it controlling that chips parameters but didn't know what the other chips did.
 

Syrup2407

Active member
vacBacker
Feedback
5 (100%)
Credits
163CR
Hi,

I have the schematic and layout for 'The Invaders' Zaccaria boards (sound board below), hope this helps!

Cheers,

Gav

Sound_PCB_Schematic.jpg


Sound_PCB_Layout.jpg
 

PhilT

Active member
vacBacker
Credits
154CR
Thanks for this.
So it looks like all sounds are generated from the 76477 chip and several 7406 take ttl inputs that are set during play to change the parameters fed into the soubd chip for each sound when it's required
The sound then goes off the sound board and through a 6w op amp in the main board then directly out to the speakers.
So one or more of the 7406 are likely to be the issue so guess thats where to start.
 

PhilT

Active member
vacBacker
Credits
154CR
So working on this board today and it has 2 extra wires on the back of IC2. Seems to be jumpering power.If I disconnect them I get no sounds at all. Someone has already done some work on the board so wondering if this was something they did to fix a track fault or whether it was an original factory mod.
 
Top