So it begins

Rob_bob_2k6

Rob_bob_2k6

Active member
Feedback
3 (71%)
Credits
203CR
Seems like a really nice picture, quite a lot of metal slug 2 burn in on my one though which is annoying as the seller told me it was complete and burn free. Can’t see it most of the time even though it looks bad switched off.
 
Retroman839

Retroman839

Senior Member
vacBacker
Feedback
12 (100%)
Credits
7,160CR
Rob_bob_2k6 said:
Seems like a really nice picture, quite a lot of metal slug 2 burn in on my one though which is annoying as the seller told me it was complete and burn free. Can’t see it most of the time even though it looks bad switched off.
Click to expand...
As long as you can enjoy playing that’s all that matters ..
IMG_6132.jpeg
This has some burn ..
Can’t see it when playing IMG_6131.jpegcan see it in white back grounds
Insert coin and a square box around
 
Rob_bob_2k6

Rob_bob_2k6

Active member
Feedback
3 (71%)
Credits
203CR
It doesn’t really bother me in game, it’s not like the insert coin burn that you can always see on some driving cabs, but it is over a quite large area.

I’ve got the led panel marquees coming next few days to go in, always thought they were a bit of fun though not original to the u4, there’s loads of room to fit them in the marquee.
 
Retroman839

Retroman839

Senior Member
vacBacker
Feedback
12 (100%)
Credits
7,160CR
Rob_bob_2k6 said:
It doesn’t really bother me in game, it’s not like the insert coin burn that you can always see on some driving cabs, but it is over a quite large area.

I’ve got the led panel marquees coming next few days to go in, always thought they were a bit of fun though not original to the u4, there’s loads of room to fit them in the marquee.
Click to expand...
Yeh nice to have that all lit up!
Will be happy when I get round to all them bits .. got the nervous part to get through yet!!!
Doing same with a blast city at mo as well..
 
eliotcole

eliotcole

Active member
Feedback
7 (100%)
Credits
739CR
Holy molies ... looking amazing!
Retroman839 said:
Little up date on the bungalow
IMG_6251.jpeg
Click to expand...
CAN YOU BUILD ME ONE, NEXT?
 
Akira99

Akira99

Active member
vacBacker
Feedback
1 (100%)
Credits
630CR
Retroman839

Retroman839

Senior Member
vacBacker
Feedback
12 (100%)
Credits
7,160CR
Akira99 said:
Hi mate hope you alright? So is the arcade room finished now then?
Click to expand...
Im all good bud thanks for asking ..

Not quite . Needs finishing off on outside .
I want a window now as well down the end ..
also it’s half serving as a storage unit at mo for all my arcade related stuff!

I’m currently decorating for a kids play room
IMG_6595.jpeg

Since moving cabs into arcade room
1x SanwA pfx decided to loose red colour .. new neck pcb fixed that until I
Replace resistor on that.. but whilst I was at it I decided to swap the tube to the correct tube with correct yoke type for my chasiss .

Neo cab ..
Grant kindly checked over chasiss for me just for poss bad yoke killed the vertical I C last night!

So todays mission monitor swap ..
I have options
I have 4 nice nanao 25” also I pulled a B& O beocenter tube this week and
Paired with polo 2 auto
IMG_6529.jpeg
😉

Last night I decided to put the groovymame into the tated egret 2..
Shmup Heven then resumed and calmness spread throughout the land
☺️😎IMG_6582.jpeg

Bungalow ( my job )
IMG_6555.jpeg

Tiles & solar panels to fit this week
How’s you doing ?
 
Last edited:
Retroman839

Retroman839

Senior Member
vacBacker
Feedback
12 (100%)
Credits
7,160CR
Akira99 said:

​


View attachment 23581
Click to expand...
I bought 27 cabs before I built the lean 2 so I did it arse about face but I like the sentiment ☺️.


Also been sucking eggs over monkey ball . Had to get another analogue stick as mo e was faulty! But until I had the replacement to confirm I was
Re wireing the loom all sorts of ways
Re calibrating . Etc . Pulling teeth with no joy .. but yep the analogue pots are toast . So I’m going to now as I have a faulty analogue stick anyways take it apart and have a go at replacing the 1k pots to 5k pots to see if that gives full speed to those pesky little monkeys !

( but what will it do to zombies revenge / cosmic smash / spike out etc.? ). Zombie revenge double speed might be fun 😉
 
Last edited:
Akira99

Akira99

Active member
vacBacker
Feedback
1 (100%)
Credits
630CR
Retroman839 said:
Im all good bud thanks for asking ..

Not quite . Needs finishing off on outside .
I want a window now as well down the end ..
also it’s half serving as a storage unit at mo for all my arcade related stuff!

I’m currently decorating for a kids play room
View attachment 23585

Since moving cabs into arcade room
1x SanwA pfx decided to loose red colour .. new neck pcb fixed that until I
Replace resistor on that.. but whilst I was at it I decided to swap the tube to the correct tube with correct yoke type for my chasiss .

Neo cab ..
Grant kindly checked over chasiss for me just for poss bad yoke killed the vertical I C last night!

So todays mission monitor swap ..
I have options
I have 4 nice nanao 25” also I pulled a B& O beocenter tube this week and
Paired with polo 2 auto
View attachment 23586
😉

Last night I decided to put the groovymame into the tated egret 2..
Shmup Heven then resumed and calmness spread throughout the land
☺️😎View attachment 23587

Bungalow ( my job )
View attachment 23588

Tiles & solar panels to fit this week
How’s you doing ?
Click to expand...
I'm okay thanks fella just getting on with life like everyone else is:). Please keep me updated on the progress of the kids play room(y) and of course keep me update on the arcade room:).
:):)
 
You must log in or register to reply here.
Top