Hi,
I've got an Asteroids cocktail machine that was fully working until I switched it on last night. Basically the player 1 and 2 start lights flash (it's set to free play) and you can start a game. When the game starts, the sounds work but you only see the ship and it's bullets. Any ideas what might be causing this? I'm new to arcade repairs (but can use a soldering iron etc and have repaired pinball pcbs) and want to make sure I don't make things worse.
On a separate note, what mods are best for me to do to the machine to prolong its life? I was planning on replacing the big blue capacitor and the pcb connector. Is there anything else I should do?
Cheers,
Mike
I've got an Asteroids cocktail machine that was fully working until I switched it on last night. Basically the player 1 and 2 start lights flash (it's set to free play) and you can start a game. When the game starts, the sounds work but you only see the ship and it's bullets. Any ideas what might be causing this? I'm new to arcade repairs (but can use a soldering iron etc and have repaired pinball pcbs) and want to make sure I don't make things worse.
On a separate note, what mods are best for me to do to the machine to prolong its life? I was planning on replacing the big blue capacitor and the pcb connector. Is there anything else I should do?
Cheers,
Mike