Nah, the F3 fuse has nothing to do with the AR2 amp, even if it did, the current draw from the amps (which is what 4-10watts? is negligible.
There's no quirks with Atari ARs, they're one of the most simplistic and reliable pcbs out there.
Upon replacing a few parts, I've NEVER had any issues with AR1/2/3s.
The fuse is a 20A slow- blow because the big blue (like any cap) is effectively a short when first powered on (hence the 35A bridge).
To determine why it's blowing, disconnect the AR2. If it still blows then it's either the bridge or the cap (unlikely). If it blows with the AR2 connected then it's likely (although not definitely) going to be the 5v main transistor (a common fault).