Battlezone
Active member
Hmmm I'm getting 0.7V DC out of an Atari power brick rather than 10-15V.
Big blue has been switched with one from a good supply and the rectifier passes
all 4 diode tests in both directions (~0.5V drop or open as expected).
I guess some transformer coils have packed up. The AC voltages are fine.
A get a low resistance through the suspect coil and I couldn't detect
any shorts between coils.
Any ideas what else to try?
Are these still tricky to get replacements for (this one is for a 60V monitor)?
Big blue has been switched with one from a good supply and the rectifier passes
all 4 diode tests in both directions (~0.5V drop or open as expected).
I guess some transformer coils have packed up. The AC voltages are fine.
A get a low resistance through the suspect coil and I couldn't detect
any shorts between coils.
Any ideas what else to try?
Are these still tricky to get replacements for (this one is for a 60V monitor)?