Dudes
Im hoping to be in the market for an Atari Star Wars cab this year, and have been reading up on whatever information is out there regarding these.
However, I do have a couple of questions which have not been answered properly.
Firstly, it appears that these cabs were originally supplied with Ampliphone Vector monitors in both the upright and the cockpit. I have also learned that it is these which are considered the weak point in the cabs in regards to breakdowns. Hence, alot of operators chose to replace the Ampliphone monitors with WG 6100 variants instead for reliability.
Now it would appear that the Ampliphone monitor is much more desirable than the WG simply because the Ampliphone gives much smoother vector lines, is that right?
My question is, why would operators replace the Ampliphone's with WG's instead of simply repairing them? Were they really THAT unreliable? If that is the case, why would most collectors (of whom most are non-tech) want an Ampliphone instead of a WG?
To confuse even more, I have read that the Ampliphone deflection is easier to repair than the WG??
Lastly, compared to Asteroids, there appears to be very little Repair logs or even threads on repairs to Star Wars PCBs. Why is this? Are the Star Wars PCB sets much more reliable than Asteroids or do the same rules apply when it comes to failures and repairs?
Thanks
Im hoping to be in the market for an Atari Star Wars cab this year, and have been reading up on whatever information is out there regarding these.
However, I do have a couple of questions which have not been answered properly.
Firstly, it appears that these cabs were originally supplied with Ampliphone Vector monitors in both the upright and the cockpit. I have also learned that it is these which are considered the weak point in the cabs in regards to breakdowns. Hence, alot of operators chose to replace the Ampliphone monitors with WG 6100 variants instead for reliability.
Now it would appear that the Ampliphone monitor is much more desirable than the WG simply because the Ampliphone gives much smoother vector lines, is that right?
My question is, why would operators replace the Ampliphone's with WG's instead of simply repairing them? Were they really THAT unreliable? If that is the case, why would most collectors (of whom most are non-tech) want an Ampliphone instead of a WG?
To confuse even more, I have read that the Ampliphone deflection is easier to repair than the WG??
Lastly, compared to Asteroids, there appears to be very little Repair logs or even threads on repairs to Star Wars PCBs. Why is this? Are the Star Wars PCB sets much more reliable than Asteroids or do the same rules apply when it comes to failures and repairs?
Thanks