They operate at 2v max. I believe they utilise 5v but have some inline resistors to reduce the voltage. So with my Asteroids I believe they have the inline resistors on the PCB.
If you ran them directly at 5v you would kill them
Purity2014-05-01 22:33:44
Point to note - if you wire them up and they do not light when coined - it could be you have your +v and zero line crossed. There should be no danger to the LED by reverse connection, so swap them around and it may cure your problem.
These operate in current drain mode - so there should be +5V on the anode at all times. They light up by the pcb providing a current path when credited. Cant see the limiting resistors on the schematice, but generally 330 or 470 ohms is about right.
Edit - p3 of the following pdf shows the package connections for the cones. Interesting that Atari used inductors in line for all their player input connections.