Beginner guide to Coin Mech Wiring

[Flinnster2]

You'll have to look at the meter itself, they usually have a sticker on them with the voltage required and a model number. From the model number you should be able to google a pin-out for them. Usually yes there is power (could be 5v or 12v so do check! Some of my cabs have one of each voltage!), ground, and then the 'meter' input.

 

[K1ngarth3r]

Okay, It uses 12V and COUNTER 1

I think I've figured all the cabling out now thank god.

Will double check I've marked everything down correctly and the test the 12v and 5v before I start plugging stuff in!

Fingers crossed it all works first time.

Just waiting on the spare parts now, hopefully by the weekend I'll have everything.

 

[Umpa2020]

Sorry for re-opening an old thread, but I think my klingon has failed and I am having trouble finding a replacement. It seems they don't make them anymore.

Does anyone know of a different solution ?