Cheese Chase: Fixed with pics

trm

Who loves you, and who do you love?
Feedback
2 (100%)
Credits
2,876CR
No problem. PM me your address and I'll stick it in the post. Just powered up the board and heard it speak the title and version so it looks like a good 'un.

cheers
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,054CR
Yeah, PLCC is no good for me. Well, at this stage anyhoo. If it becomes a last resort then I'd frig up some kind of converter...
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,365CR
a00d8341f4baf53ef0133ef5ecccf970b-pi
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
1,981CR
Guess what I just found in a pile of PCB's I hadn't got around to looking at ...

yep, I also have a cheese chase!
smiley36.gif


oh, and just been sent this link from the Mame group -

http://francksauer.com/index.php/games/15-games/published-games/20-cheese-chase

Macro2013-10-01 14:17:45
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,054CR
Yeah, been in touch with Franck from that link to ask about schematics already (there aren't any about incidentally).

So, erm, yeah. I hope yours works then! Plug it in, it's Jamma.

Chip received this morning thanks so at least by tonight I'll know if it fixed the issue or not, even if you may need it back
smiley36.gif
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,054CR
Yes, that would be handy!

Be aware that with the Jamma connector at the top, in the bottom left there's a 48pin DIP socket and it's meant to be empty for Cheese Chase...

Think thats the only one though.
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
1,981CR
well, the custom says 'A&M-001-01-A' which doesn't find anything in google and the previous owner nicked all the eproms

so, not sure what it is unless I can read the 42 pin mask rom and romident it

better check Mame source for what else it could be.
 

guddler

Busting vectors like it's 1982!
vacBacker
Feedback
10 (100%)
Credits
4,054CR
Happy to report that I was spot on with my diagnosis and that the new DAC / colour palette chip has fixed the fault. Rather strangely it's fixed a sound fault as well that the board had at the start of the game too (speech at the start came out as white noise) and the error light no longer flashes on the PCB. Slightly odd that but hey!

Just popped down to the house for a USB stick. Expect bad signal Vs good signal from the scope shortly...
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
1,981CR
well, this one plays the startup tune and then flashes the error light, but nothing on screen

checking the DAC and /RD and /WR are both high, take DAC out and they show activity - hmm, does that sound familiar
smiley5.gif


oh well, should have a few more IT boards sitting around, if not will mark it up as needing a DAC for when I bump into one.
 
Top