CPS1 Graphics Issues

jerryspaghetti

Active member
vacBacker
Feedback
37 (100%)
Credits
1,995CR
I have a Final Fight CPS1 and there's some graphical glitching.

Character sprites are fine but the backgrounds etc. are all over the place.

See 1st pic below.

I've re-seated and cleaned every socketed chip on all 3 boards and the sockets all look clean and clear on visual inspection, including the actual board connection sockets.

Anyone else experienced this issue?

I did notice that the location/number of the chips on my B board (2nd picture) seem to be different to other Final Fight B boards i've seen online (3rd picture) so thinking mine is maybe a conversion? Mine has 4 extra Eprom chips at locations '14, 15, 24 & 25' and one missing at location '5'

Pretty new to CPS tech so any advice would be great thanks!

IMG_9598.jpg


IMG_9584.jpg


final_fight_cps1.jpg
 

cliff_poole

Active member
vacBacker
Feedback
6 (100%)
Credits
1,069CR
I was just going to suggest swapping boards around first.

If you do find the A board to be the problem, try pressing down on the PPU chip if you can get your finger in there, it is the big square surface mount one, see if that changes the graphic corruption.

The A boards are also prone to damage on the underside so look very carefully all over for bent chip legs touching, or scuff marks broken tracks etc.

The schematics are available and there are some good repair guides online.
 

jerryspaghetti

Active member
vacBacker
Feedback
37 (100%)
Credits
1,995CR
cliff_poole said:
I was just going to suggest swapping boards around first.?

If you do find the A board to be the problem, try pressing down on the PPU chip if you can get your finger in there, it is the big square surface mount one, see if that changes the graphic corruption.

The A boards are also prone to damage on the underside so look very carefully all over for bent chip legs touching, or scuff marks broken tracks etc.

The schematics are available and there are some good repair guides online.

Cheers, i'll report back!
 

mysticmonk

Active member
Feedback
12 (100%)
Credits
1,051CR
Somebody should start getting those "bootleg" A boards with the dodgy sound sections and get replacing them.

Like here, the populated sound section

best_a_board.jpg


Versus the bootleggy types

BA0C025D-9E85-4A8B-B3E4-0928D8D926D9.jpeg
mysticmonk2022-05-17 14:07:20
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,325CR
mysticmonk said:
Somebody should start getting those "bootleg" A boards with the dodgy sound sections and get replacing them.

Like here, the populated sound section

I don't think they're bootlegs.
I think there was a batch of 3/4 finished boards and someone bought them and badly bodged on some bits to get them working.

They made squillions of CPS1 systems, so it's believable there were all sorts of bits kicking around- there was a place selling NOS-looking C-boards recently (I got some as spares)

As for that A-board custom. Yes, it's the worst thing that could fail on it, for many reasons. Sorry.
 

mysticmonk

Active member
Feedback
12 (100%)
Credits
1,051CR
John Bennett said:
mysticmonk said:
Somebody should start getting those "bootleg" A boards with the dodgy sound sections and get replacing them.

Like here, the populated sound section

I don't think they're bootlegs. 
I think there was a batch of 3/4 finished boards and someone bought them and badly bodged on some bits to get them working. 

They made squillions of CPS1 systems, so it's believable there were all sorts of bits kicking around- there was a place selling NOS-looking C-boards recently (I got some as spares)

As for that A-board custom. Yes, it's the worst thing that could fail on it, for many reasons. Sorry.

Yeah they're not bootleg bootlegs, they're semi legit legs, shoelegs, bootshins, rubberclogs.

The main setback from what I know is the crappy audio section. With original A boards dropping like flies it would probably be worth getting these "bootlegs" and replacing audio. Or maybe that's too much trouble I dunno.
 

John Bennett

Senior Member
vacBacker
Feedback
10 (100%)
Credits
5,325CR
mysticmonk said:
The main setback from what I know is the crappy audio section. With original A boards dropping like flies it would probably be worth getting these "bootlegs" and replacing audio. Or maybe that's too much trouble I dunno.

Oh indeed, grab anything with proper chips on if it's cheap. Sadly even bodge-ridden, they're probably still punted for £100+ a mainboard or something sillier, these days.
 

cliff_poole

Active member
vacBacker
Feedback
6 (100%)
Credits
1,069CR
I worked on a number of these some years ago and, dare I say it, they were quite easy fixes. Not always the custom chip. They are a bit of a pain to troubleshoot because the B board covers most of the chips on the A board. Best way around this is to work on it flipped upside down, with a spare A board on the side for reference.

The surface mount chips on the A and C boards often suffer dry joints, which is why I suggested pressing down on the PPU.
 

jerryspaghetti

Active member
vacBacker
Feedback
37 (100%)
Credits
1,995CR
cliff_poole said:
I worked on a number of these some years ago and, dare I say it, they were quite easy fixes. Not always the custom chip. They are a bit of a pain to troubleshoot because the B board covers most of the chips on the A board. Best way around this is to work on it flipped upside down, with a spare A board on the side for reference.

The surface mount chips on the A and C boards often suffer dry joints, which is why I suggested pressing down on the PPU.

I'll definitely give this a try, cheers!
 

jerryspaghetti

Active member
vacBacker
Feedback
37 (100%)
Credits
1,995CR
Definitely the A board gone. B and C boards working well with my SF2 A board.

I’ve actually bought this from ebay and was in process of sending back for a refund but the buyer is happy to partially refund and let me keep B and C boards.

Any ideas what the value split should be so we can work out a refund amount?

For example: I’d guess the A board to be half the value and the B and C boards half the value?
 

yoganuggy

Active member
vacBacker
Feedback
2 (100%)
Credits
654CR
I got one of those "bootleg" A boards. Possibly they are from cps1.5 as that revision had no audio section (1.5 used q sound).

They are shocking alright but they work.
 

grobda

"Look at the size of that thing!"
vacBacker
Feedback
7 (100%)
Credits
1,061CR
I've got one of those A boards as well, genuine capcom repopulated with bootleg ym2151,oki etc. and an alternate amp. heres a pic of it unpopulated. not familiar with cps 1.5.

CPS1-dash.jpg.52746fc9cae4f584b598db16e2847f55.jpg
 
Top