I have a Final Fight CPS1 and there's some graphical glitching.
Character sprites are fine but the backgrounds etc. are all over the place.
See 1st pic below.
I've re-seated and cleaned every socketed chip on all 3 boards and the sockets all look clean and clear on visual inspection, including the actual board connection sockets.
Anyone else experienced this issue?
I did notice that the location/number of the chips on my B board (2nd picture) seem to be different to other Final Fight B boards i've seen online (3rd picture) so thinking mine is maybe a conversion? Mine has 4 extra Eprom chips at locations '14, 15, 24 & 25' and one missing at location '5'
Pretty new to CPS tech so any advice would be great thanks!
Character sprites are fine but the backgrounds etc. are all over the place.
See 1st pic below.
I've re-seated and cleaned every socketed chip on all 3 boards and the sockets all look clean and clear on visual inspection, including the actual board connection sockets.
Anyone else experienced this issue?
I did notice that the location/number of the chips on my B board (2nd picture) seem to be different to other Final Fight B boards i've seen online (3rd picture) so thinking mine is maybe a conversion? Mine has 4 extra Eprom chips at locations '14, 15, 24 & 25' and one missing at location '5'
Pretty new to CPS tech so any advice would be great thanks!