CVS

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,653CR
Alpha1 said:
I have 3 or 4 Century CVS systems somewhere. I have no interest in them I can pull them out if anyone is interested to buy them.

Sluggy said:
I would certainly be interested even more so if you have converters?

Not sure if I have or not - unsure of the platform and hardware. I'll pull them out over Xmas.
 

andrewsm

Active member
Feedback
1 (100%)
Credits
485CR
It latches at the top but I dont have any cables. Try going though RS website or maybe CPC etc? Prob find a connector will fit somehow or other
 

favouredson

Super Star
vacBacker
Credits
1,260CR
I have a spare original version (without the 74LS367s) conversion board.
CVS CONVERSION BOARD 500-43

It has all the connectors in place and the screw terminals are marked up A-K in pairs. This ties up with the drawings I have of the button bank.
 

Sluggy

Active member
Feedback
1 (100%)
Credits
73CR
favouredson said:
I have a spare original version (without the 74LS367s) conversion board.
CVS CONVERSION BOARD 500-43

It has all the connectors in place and the screw terminals are marked up A-K in pairs. This ties up with the drawings I have of the button bank.

PM sent
smiley1.gif
 

Sluggy

Active member
Feedback
1 (100%)
Credits
73CR
ok... now on the main board visible under the botton edge of the rom board there is a row of chips 5H J K & L I have 2 of these getting hot 1st can some one tell me the chip Number per socket (C and Number) 2nd does anyone know what they are as they are restamped?
 

favouredson

Super Star
vacBacker
Credits
1,260CR
They are PALs.
On the mainboards I have with replacements they are:
15H & 15K = PAL12L6
15J & 15L = PAL10L8

IDs are:
15H = C107
15J = C104
15K = C108
15L = C105

In case you need it for future reference:
5F = C101 - ???
9K = C102 - PAL10L8
11D = C103 - PAL10L8
14K = C106 - PAL12L6
 

Sluggy

Active member
Feedback
1 (100%)
Credits
73CR
favouredson said:
They are PALs.
On the mainboards I have with replacements they are:
15H & 15K = PAL12L6
15J & 15L = PAL10L8

IDs are:
15H = C107
15J = C104
15K = C108
15L = C105

In case you need it for future reference:
5F = C101 - ???
9K = C102 - PAL10L8
11D = C103 - PAL10L8
14K = C106 - PAL12L6

Hi Garry, do you have dumps of the pals?
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
2,010CR
I've got about 12 motherboards and various other bits, I also should have one (or more) carts without the security chip (i.e. it is wired to bypass it) so you can put whatever game you like on there, so I *should* have a complete set of PAL's

if you need any I can dig out the PAL cracker (or see if they read!) and try and dump them.

Porchy can then add them to his page

if you need anything in the way of boards I can check as I probably have spares

(it would be fairly easy to knock up your own carts since they are just 3 banks of roms - code, speech and graphics (if you bypass the security chip and use one bigger rom for each bank), but the board has to be the same size to have the connectors in the right place!
 

favouredson

Super Star
vacBacker
Credits
1,260CR
Sluggy said:
Hi Garry, do you have dumps of the pals?

No, I don't.
I do have several mainboards with replacement PALs so maybe somebody cracked them at some point.
They all have original C101s in place.
 

Sluggy

Active member
Feedback
1 (100%)
Credits
73CR
Ok guys I have no option now but to buy a working complete board set I have too many negative options that I cant prove either way without a fully working set..... anyone have a complete set to sell? ASAP
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
2,010CR
Sluggy said:
I do have several mainboards with replacement PALs so maybe somebody cracked them at some point.

From the ones I have I think that Century ran out of the customs so started using PAL's instead - I also have some cartridges where the protection chip has been 'wired out' so they could use unencrypted dumps instead (it's where a lot of the dumps in MAME came from!)

Atari had the same problem with SLAPSTICs, that is why they also exist as PEEL versions
 

Sluggy

Active member
Feedback
1 (100%)
Credits
73CR
Is the security chip doing the same thing for each rom board? IE can I just burn a new game rom set and use the security chip as is or whats the wire out method??
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
2,010CR
no, the chip can move banks of rom around and also decrypt the data (with a different key based on the address)

BUT

you can bypass the chip and use unencrypted dumps instead - so it is possible to put what you want on there - I think century ran out of chips so later carts have the patch instead!

I need to dig out the boards and (a) test them! and (b) document the jumpers to miss the chip out

if it had any decent games on it would be easy to make a switchable cart!
 

favouredson

Super Star
vacBacker
Credits
1,260CR
I have four ROM boards with CC1 populated and one without.
Two have ROMs with Century labels on which I presume are original but the other two have ROMs I burnt as they were missing.

As I assumed the IC was universal I simply used the MAME ROMsets for Heart Attack and Out Line and both have worked without issues when I have had my mainboards running properly.
I have no idea what ROMs were on the boards originally as none of them have their covers.
 

Macro

Active member
vacBacker
Feedback
4 (100%)
Credits
2,010CR
does it have anything in CC1 then ?

the ones I have without the protection chip have a wirewrap socket with some wires across it.

I have dumps of games with different protection, so they presumably had more than one, but then I have also had 2 copies of the same game (space raiders) with different protection, so it probably depended upon what ones that they had left!

from memory, all mame roms are unencrypted (unless of course someone else has added the various encrypted sets!)
 
Top