DATA I/O Serial connections
25
pin 9 pin
6 1
2 2
3 3
20 4
7 5
6 6
5 7
4 8
9 not used
Instructions for using Data I/O 29B
It will only run via updated promlink in XP
or earlier. To run in VM follow these instructions.
1 boot main computer. Fresh boot is essential!
2 Open VM player and XP.
3 Plug USB-Serial adapter in configured as
COM1.(disable normal COM1 first.)
4 Turn Data I/O on. Ensure settings are
9600,8,off,stop 1,.
5 Press Select, F, 1, Start, Start.
6 Open updated version of promlink.
Settings should be as in 4 above.
This should give good two way activity.
DO NOT USE FB (open port. This kills all
transmission from computer to Data I/O).
Ensure no chips are in sockets when turning
Data I/O on. It seems to destroy the chip select.
25
pin 9 pin
6 1
2 2
3 3
20 4
7 5
6 6
5 7
4 8
9 not used
Instructions for using Data I/O 29B
It will only run via updated promlink in XP
or earlier. To run in VM follow these instructions.
1 boot main computer. Fresh boot is essential!
2 Open VM player and XP.
3 Plug USB-Serial adapter in configured as
COM1.(disable normal COM1 first.)
4 Turn Data I/O on. Ensure settings are
9600,8,off,stop 1,.
5 Press Select, F, 1, Start, Start.
6 Open updated version of promlink.
Settings should be as in 4 above.
This should give good two way activity.
DO NOT USE FB (open port. This kills all
transmission from computer to Data I/O).
Ensure no chips are in sockets when turning
Data I/O on. It seems to destroy the chip select.