Dot matrix display help

obcd

Active member
Credits
3,830CR
Nope, casing doesn't need to be connected.

It might be worth reading the eeprom again to see if we can locate those 3's somewhere.

Maybe it's only returning ok after a cycle is finished, like when one block has been displayed.

It's also possible that it waits for a certain amount of characters and sends the OK when it sees no more characters coming in for 1 or 2 seconds.

Can you provide more info on what it's displaying and how? Is it still showing 4 blocks of 24 symbols? How many 2's and 3's is it showing?
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
The first block starts with four 1's then 4 a's. then block 2 has eight 2's, block 3 and 4 seem the same, the 3's have gone, the rest seems unchanged.

Thanks Ronnie
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
Would there be something better for this that works on windows XP?

The OK that you see in the window only shows after key presses never on it's own.

Thanks Ronnie
 

obcd

Active member
Credits
3,830CR
On xp, you had hyperterminal that is doing pretty much the same.

So, on every keypress, you get the OK after a fraction of a second.

If you press 2 keys fast after each other, does it give you 2 ok's or just one?

You can see the 1111 stored in the eeprom There also is 22 in it followed by 0xb3 bytes 6 times.

On location 0x60 and 0X61 there are 2 0x00 bytes. If we consider the display showing 4 blocks of 24 letters, those 2 don't belong to the text anymore. The text is only 96 bytes which goes from 0x00 - 0x5f

As you have additional '1' and '2' characters on the display now, did you use that key several times or other keys?
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
I only ever get OK on my pc screen, sometimes it takes about 5 presses to get one OK, or maybe I'm impatient? hitting enter also gives OK, or if I hold down a key it will start to scroll OK in window continuously, it's hard to tell what's happening as I'm hitting random keys and not paying attention too much! but when I think a key has made a character in the display and I try it again it seems to just add dots to the text that is already scrolling but when that comes round again those dots have gone! So I have no idea how I got the 1's or 2's to appear in the text, as I said I also had a string of 3's but they went away! it's all very confusing! When I get some time I will try and see if I can note changes but as I said it's hard with the text scrolling across the display when most of the time I seem to add dots, maybe the 1's and 2's were added with another setting in putty? like odd even or none? sorry details are not clear!

Thanks Ronnie
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
Had a play about with this today and I can't get it to do anything predictable! it's just a stab in the dark, although I do now have some 4's in place of the last three 2's, but never managed to produce a letter.

I'm now wondering about this bootloader mode and if anything can be done with that?

thanks Ronnie
 

obcd

Active member
Credits
3,830CR
If you could upload a few more eeprom images with changes that stay in it, we might be able to figure out why the information in it is deleted. Unless they intenionally obfuscated it's contents, with some working examples, it might be doable.

The bootloader mode is tricky as upon mistake, the microcontroller might get erased. This would move us further from a working device. Even in a best case scenario where we could read out the microcontroller, understanding how it works in assembly is a challenge.

The idea is to simply program the eeprom with your external programmer once we figured out how we can make the text in it permanent. This seems the easiest way to get result at the moment.
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
WOW!! obcd you are a genius! that has worked " LETS TRY JUST THIS" is the first line of text displayed, how did you manage to figure that out? does this mean you have cracked the code, in any case that's brilliant progress, well done.

Thanks Ronnie
 

obcd

Active member
Credits
3,830CR
No genius... Just a bit of luck.

So, what text do you want on it? It has to be 4 blocks of 24 characters.

I will try to prepare an eeprom image for that. With just a bit more of luck it might work.
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
Sorry obcd I missed your reply somehow and only found it this morning!

That's really good of you to prepare the image I would have no clue! does the 24 characters include spaces? will have a think as no idea what it would have said

Thanks Ronnie
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
I thought long and hard about the messages and wrote lots of things! I found it hard but I think this might do?

KASH KONG 2p TO PLAY!

WIN A JACKPOT BONUS!

PACKED WITH FEATURES!

ODDS UP FOR A BIG WIN!

Thanks Ronnie
 

Ronnie Dent

Active member
vacBacker
Feedback
15 (100%)
Credits
1,206CR
I noticed with the very few picture online sometimes the text is red others it's green, but I think we need to be happy just to get the thing to show messages and not complicate it further!

Thanks Ronnie

kk_push.jpg


kash_kong.png
 

obcd

Active member
Credits
3,830CR
https://www.ukvac.com/forum/data/uploads/2289/kkdump5.zip

Try this one first.

Let's see if at least this works.

Changing color and behavour is usually done by adding a non ascii control character in front of the text that needs to be changed. You can exclude the displayable characters. This still leaves plenty of them to test.

Every text block has some spaces in front. Replacing one of those with a control character should do the trick.

Basically, characters 0x20 - 0x7F are displayable. There are still 32 + 128 remaining to test.

0x00 - 0x1F and 0x80 - 0xFF

It's possible that the addition of some characters will cause the eeprom to switch back to the default text.

I really don't feel like preparing 160 files to test. It's not undoable.
 
Top