Hyper Olympic boards

Body pop

Active member
vacBacker
Feedback
24 (100%)
Credits
1,266CR
My hyper Olympic has lost the the main character
Sprites.
Are these boards interchangeable
With hyper sports
Or does anyone have any experience
Of what caused this ?
Had a look about the internet and it
Seems to be a chip on bottom board
Only got these so pretty gutted
 

RGP

Meeter & Greeter
Feedback
5 (100%)
Credits
2,039CR
I don't think the bottom boards are interchangeable.

Everything i've learned about faults with Konami boards in this era seems to come down to either bad ROM sockets or failing Fujitsu chips.

A very detailed Hyper Sports resurrection was done a few months ago in the tech section here - sorry I don't have time to search for and link it just this sec. If you can find it, this may help.

Is it all the foreground character sprites that have disappeared - your athletes, judges etc? or are some visible and others not.

If there's no graphics at all then it sounds like the CS and OE lines on the ROMs aren't getting set so i'd look for the motion object roms and probe around those pins and see if you're seeing activity.

Also, check your voltages at those ROMs - make sure you've got >4.75vDC getting there - odd things start happening at lower voltages and some of the Konami boards are a bit thirsty.

I'm not in front of a schematic at the moment but those are some pointers and places i'd initially look.
 

Body pop

Active member
vacBacker
Feedback
24 (100%)
Credits
1,266CR
I think it was just the athletes missing
It's actually hyper sports that's gone
Iv tried it in cab and Supergun
In the Demo screen the weight lifter isn't there
Then in play the swimmer is like a square sort
Of flashing ,with no other ones on screen
 
Top