Hi
Picked up a cabinet last week and I think there's a problem with the PSU. Upon power on the monitor comes on and the marquee lights up, but there's no other activity. I tested the JAMMA harness for +5V and on both pins 3 and 4 the voltage is jumping between 10 and 12? Also the LED seems to be flickering and it's making an odd sound - see video footage here.
There seems to be no life on +12V either, although I'm not sure how important this is?
So before I buy a replacement could someone please advise:
The cab was confirmed working when it left its previous owner, so I'm wondering if it's taken a knock in transit.
Any other input would be welcome, I've a good general knowledge but not a lot of experience.
Thanks
Picked up a cabinet last week and I think there's a problem with the PSU. Upon power on the monitor comes on and the marquee lights up, but there's no other activity. I tested the JAMMA harness for +5V and on both pins 3 and 4 the voltage is jumping between 10 and 12? Also the LED seems to be flickering and it's making an odd sound - see video footage here.
There seems to be no life on +12V either, although I'm not sure how important this is?
So before I buy a replacement could someone please advise:
- What's the likelihood of this PSU having failed?
- Why didn't those voltages kill my PCB? I've tested it on my supergun and it's OK.
The cab was confirmed working when it left its previous owner, so I'm wondering if it's taken a knock in transit.
Any other input would be welcome, I've a good general knowledge but not a lot of experience.
Thanks