Hello,
I am having some issues with my monitor and I am hoping someone can help please?
I have a Sega Blast City, which was bought with the monitor fully working in the vertical position. I got it home and changed it over to horizontal position. Here are where the issues started. Once rotated, it would not fire up and I was getting a horrible cracking from the anode / diode cap (excuse the lack of knowledge, I am on a learning curve). It sounded like it was trying to fire up, but couldn't. I know these things are dangerous, so I took care and managed to push the cap around and that appeared to do the trick. The Blast was then put in my garage while my arcade room was being built.
However, I just took the Blast out of storage today and the monior wouldn't fire up. This time no noise from the cap, but I did the same thing and it came on. However, it went off again later and hasn't come back on.
Any ideas? I removed the cap and it looked like it might be missing a bit from one side, but then I don't really know what they look like anyway? Maybe it just needs pushing in, but I should really discharge it first before messing around. The rubber cap is also not down on the tube properly, it is sticking up around the edges. I will try and get some pictures.
Any help or advice would be greatly appreciated, as it's so frustrating......
Cheers
John
I am having some issues with my monitor and I am hoping someone can help please?
I have a Sega Blast City, which was bought with the monitor fully working in the vertical position. I got it home and changed it over to horizontal position. Here are where the issues started. Once rotated, it would not fire up and I was getting a horrible cracking from the anode / diode cap (excuse the lack of knowledge, I am on a learning curve). It sounded like it was trying to fire up, but couldn't. I know these things are dangerous, so I took care and managed to push the cap around and that appeared to do the trick. The Blast was then put in my garage while my arcade room was being built.
However, I just took the Blast out of storage today and the monior wouldn't fire up. This time no noise from the cap, but I did the same thing and it came on. However, it went off again later and hasn't come back on.
Any ideas? I removed the cap and it looked like it might be missing a bit from one side, but then I don't really know what they look like anyway? Maybe it just needs pushing in, but I should really discharge it first before messing around. The rubber cap is also not down on the tube properly, it is sticking up around the edges. I will try and get some pictures.
Any help or advice would be greatly appreciated, as it's so frustrating......
Cheers
John