Yes, the CPS1 and CPS2 have the same electrical connections. The CPS2 is just a bigger connector with lots of pins that do nothing,Got mine the weekend, really happy with it, seems to work great.
One question, my cab has a cps2 34 pin kick type connector for my extra buttons, but if I'm right the connector on the multi system is a cps1 type. Is there an adapter to convert one to the other?
Ok, I will take a look. We have very high speed polling and minimal de-bounce in all CTRLDock firmware so have not had this sort of issue reported before. I'm a big shooter fan too, so I will check it out and see if I can replicate here.Hi Richard @multisystem,
I received my Multisystem 2 Arcade last week and unfortunately I am having a significant issue with dropped inputs every 30-60 seconds.
This is especially noticeable and possible to test when holding the focus laser on button A on Cave games such as Dodonpachi or Ketsui. The button drops for a split second (or loses the laser lock in Ketsui) then becomes active again.
This is running in an Aero City with 5.05v and new Sanwa buttons. I tried increasing the voltage and this did not help. I am also using the provided ini file. The same issue does not occur when running a Mistercade V1 in the same cab.
I think this may be due to an issue with the polling and debounce in the CTRLDOCK software. Please could you test to see if you can replicate this or provide a possible solution? Thanks!
Thanks for clarifying. I have bought the one from Mike's Arcade, so good to hear it should work when it turns up.Yes, the CPS1 and CPS2 have the same electrical connections. The CPS2 is just a bigger connector with lots of pins that do nothing,
We needed to use CPS1 for space, but it's electrically (functional) as per CPS 2 - but you are correct you will need a CPS2 to CPS1 adaptor cable - or rewire the same connections to the CPS1 connector directly.
I am looking at making our own little adapter / cable for CPS2 users to make it a bit easier in the future, they seem to be a bit tricky to get hold of in the UK for some reason.
I have tested out a few systems here on the bench and also in a JAMMA cabinet.Hi Richard @multisystem,
I received my Multisystem 2 Arcade last week and unfortunately I am having a significant issue with dropped inputs every 30-60 seconds.
This is especially noticeable and possible to test when holding the focus laser on button A on Cave games such as Dodonpachi or Ketsui. The button drops for a split second (or loses the laser lock in Ketsui) then becomes active again.
This is running in an Aero City with 5.05v and new Sanwa buttons. I tried increasing the voltage and this did not help. I am also using the provided ini file. The same issue does not occur when running a Mistercade V1 in the same cab.
I think this may be due to an issue with the polling and debounce in the CTRLDOCK software. Please could you test to see if you can replicate this or provide a possible solution? Thanks!
Richard @multisystem, thanks for your reply. I resolved the issue today! After troubleshooting and not finding a solution, I did a completely fresh installation of the Mister on my SD card instead. This resolved all the dropped inputs I was experiencing!Ok, I will take a look. We have very high speed polling and minimal de-bounce in all CTRLDock firmware so have not had this sort of issue reported before. I'm a big shooter fan too, so I will check it out and see if I can replicate here.
Fantastic. Glad it's all running well for you now.Richard @multisystem, thanks for your reply. I resolved the issue today! After troubleshooting and not finding a solution, I did a completely fresh installation of the Mister on my SD card instead. This resolved all the dropped inputs I was experiencing!
I now think the issue was because the SD card I used was previously installed in a Mistercade. I thought changing the ini file to the Multisystem Arcade one would be enough, but I think something caused issues with the mapping despite deleting all previous config files.
I have to add, the image quality on the Multisystem Arcade is incredible!
I haven't experienced this so far. I have the global volume and core volume set at 100% for all cores. I only need to turn the volume pot on the Multisystem to around 50% to 75% to get a loud enough volume.I've not had much time to use mine yet but when I tried it, noticed the volume was quite weak and very low even with the Core volume in software cranked 100% and the physical volume pot on the actual unit at max.
Anybody else experiencing this?
Thanks Richard. I agree with others that mentioned a CPS2 to CPS1 kick harness would be great. I already have a CPS1 harness, but I can see the adapter is difficult to source in the UK. I also had to trim some of the plastic housing from my CPS1 connector to get it to fit on the Multisystem.Delighted you are happy with it, we want to do so much more with Arcade hardware so please feel free to let us know what other electronics, interfaces and systems would be good for future Arcade use.
Read my recent posts about the matter. I too have had many problems with player 2 controls and coin inputs. Richard has very kindly assisted and explained why its happening. It remains a frustration for me though I have to say.I have a coin button on my cab that's wired into the jamma connector, on the mister it's detected as Player 2 select button, and i think because of this it's not detected when i try to define keys in the mister setup or any core. I think Mister mirrors P1 to P2 controls which may be the reason.
Has anyone else had this issue, is there a fix?