Hi all
As you know I have been very kindly loaned a Nemesis board
.
It's working great apart from one problem: The ship fires on its own constantly (very slowly).
My cab is Unigame wired with a JAMMA adaptor and I'm using a Jammaboards Konami-JAMMA adaptor, so there should be no problems there.
Of course I've checked the buttons on my cab, and they're fine, and the voltage at the board is around 5.07v. I've tweaked that a bit with no difference.
I've tried changing between 1 and 2 player controls on the dips, and again, makes no difference.
This is what I'm getting in test mode:
Any ideas, fellas?
I'm desperate to play one of my grail games!!!
As you know I have been very kindly loaned a Nemesis board
It's working great apart from one problem: The ship fires on its own constantly (very slowly).
My cab is Unigame wired with a JAMMA adaptor and I'm using a Jammaboards Konami-JAMMA adaptor, so there should be no problems there.
Of course I've checked the buttons on my cab, and they're fine, and the voltage at the board is around 5.07v. I've tweaked that a bit with no difference.
I've tried changing between 1 and 2 player controls on the dips, and again, makes no difference.
This is what I'm getting in test mode:
Any ideas, fellas?
I'm desperate to play one of my grail games!!!