repairs

Satyr1

Newbie
Credits
1CR
I have 3 cabinets all with problems:

Galaxian,no sound or picture

Defender,screen shows ram failure then fuzzy screen

Battlezone,sound but no picture

Can anyone help with repair?
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
Satyr1 said:
I have 3 cabinets all with problems:

Galaxian,no sound or picture

Defender,screen shows ram failure then fuzzy screen

Battlezone,sound but no picture

Can anyone help with repair?

From the little you've given us to go on I'd say the Galaxian has a general power issue or just a PCB issue, the Defender a RAM problem and possibly a monitor issue, and Battlezone either a monitor problem or a problem on the PCB XY output causing the spot killer to kick in. Really difficult to be sure without much more info I'm afraid.
 

Nes4life

Active member
vacBacker
Feedback
12 (100%)
Credits
1,134CR
A video of the issues would probably be a quick route. Perhaps photos.

Any signs of life on galaxian at all (lights perhaps)?
Defender; if you’re not wanting to hunt down the bad RAM, desolder it and replace it, then you’ll want to post it to a friendly repairer and pay for the repair. Fuzzy screen could possibly be fixed with some adjustments of the monitor (not too hard).
Battlezone, could be a PCB issue or a monitor issue. You would need to do some diagnosis yourself; check X out and Y out with a scope or multimeter (to just see for activity), or send the PCB off to a repairer to check it over. If it’s a monitor issue then that’s another issue.

The last thing to be clear about is if you really want to keep all 3 and get them all working (will require modest effort & money on your part) or if you’d consider selling any of them ‘as-is’ (get money to repair your favourite and least amount of effort on your part).

Hope that helps! Welcome to the forum.
 

Satyr1

Newbie
Credits
1CR
Thanks for reply.I am prepared to pay to get all 3 running again,the cabs ae in pristine condition so it will be worth it.What I really need I suppose is either a repairer to come to me or I take them to a repairer,is there anyone close to Broadstairs,Kent,who could help?
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
Shame you didn't post before last summer, I was on holiday in Broadstairs!

Sadly there aren't really any travelling repairers of arcade machines around these days (if there ever were?). Broadstairs is sadly quite remote for anyone outside of Kent so you might struggle to find someone to do what you're asking. Please be extremely cautious before sending them off to some random bloke off the internet, there are some scammers out there who'll take your stuff and disappear forever.

Sadly this is why many of us end up having to learn way more than we intended on how these things work and how to fix them, realistically given their age they are going to break down fairly regularly even after you get them fixed. Most of the information on getting started is out there on the web or by asking specific questions to forums like these. It's how I learned and I'm sure others too.

I think with a little time and effort you could isolate what's causing your problems and then look to get just those particular parts fixed or replaced. You can post PCB's or monitor chassis to a number of reputable repairers much easier than entire cabs :)
 

Satyr1

Newbie
Credits
1CR
OK,I will take some pictures and post them to see if that helps.Having already lost a space invaders cab to someone I thought was genuine I will not send again by courier but deliver myself!
 

DanP

Administrator
Staff member
vacBacker
Feedback
5 (100%)
Credits
2,232CR
Damn, sorry to hear that.

Probably worth investing in a Multimeter at the very least if you don't already have one. This will help you measure the power voltages (of various values) in your games, this will likely be the first step to help diagnose what's going on.
 
Top