Sega megatech screen issues

ukaccord

Newbie
Credits
4CR
Thanks for the heads up Nes4life. . Will have to give muddy a shout.. and does the megadrive six button adaptor fix for arcade buttons or is it for the 6 button megadrive controller itself...
 

Nes4life

Active member
vacBacker
Feedback
12 (100%)
Credits
1,134CR
It lets you plug in two 6-button MegaDrive controllers but it wouldn't be impossible to convert these to arcade buttons. There are no native 6-button Mega-Tech games so you have to burn your own; but plenty of tutorials for that.
 

ukaccord

Newbie
Credits
4CR
Prob go through the hyperspin route buddy.. will have to speak to zeebow to see how he setup hyperspin to show the game artwork on the top screen...as that looks brilliant.
 

ukaccord

Newbie
Credits
4CR
Thanks for the heads up silverfox. . I take your taking about the active marquee .. I think that will be a brilliant 3ay to use the top space... I guess I have alot of reading and research to do on hyperspin and setting it all up..guys once again want to say a bug thankyou for all your input in guiding this newbie.. will defo be on the forum reading and researching..hope you guys don't get f3d up with my questions lolukaccord2015-11-01 22:20:32
 

caius

Active member
Feedback
7 (100%)
Credits
588CR
ukaccord said:
It was on the first run after I cleaned it all up buddy.. but after that I couldn't get it to give a perfect t picture on boot... sound and everything else is all good. . No weird noises.. just some of the image distorted or lines all over the place.

Do a reflow of the SMD VDP custom chip, probably some pin are loose.
 
Top