Sega Rally 3 rebuild and conversion

[Flyback2021]

Think were pretty much done after this wired up today, cheers anyway Ant
Time consuming when you have to go through boxes of cables to find right colours so it matches all through as much as possible

Apparently in some games the Test/Service buttons do function so worth adding these, coin mech/credit button connected to the Coin Input on I-pac so it has all options available

I did think how nice it would be to have a powered File also with changeable files but I did find a place think it was Japan that had made them already
See the Magic Pizza didn't last

Great stuff, nice to hear you are nearing the wiring finish line.
Poor magic pizza, classic episode and very much a real world problem which I could identify with when I was growing up

 

[Bods]

Got a bit more Saturday and today

Originally I'd put the diodes inline with the wires to the switches so I've changed it too same setup as my Twin with diodes on the board, the setup for this is 1 grey connection to each switch, the other side there tied together in group of 4 so 2 switches on up/down shifter and handbrake connected to first 3 from left, each common from those goes to 1-3 of the green from left side, then the Test and Service is 5 and 6 on grey strip with common going to 1 and 2 again on green
only connected 12 out of 16 as the last 4 are POV hat and there is only the service panel up/down shiifter and handbrake connected to this now, everything is connected up now


Soldered one of those terminal strips to vol pot so can unscrew wires



Just need to sort some bolts for corners and label them up