Substitute boxes

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
Pardon my ignorance but a friend introduced me to substitute boxes for testing various components today. I didn't even know these existed, but what a great idea, for testing capacitors etc

It made me wonder if anyone use anything similar for testing arcade parts?
 

Alpha1

Do the Shake and 'VAC
Staff member
vacBacker
Feedback
95 (99%)
Credits
5,651CR
Pix?
smiley17.gif
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
$%28KGrHqJ,!p!FED7YdTU1BRDR,cSd8w~~60_12.JPG


This is a capacitor resistor substitution box. So it ranges between different resistor and capacitor values.

Nothing exciting to look at, but an interesting idea.
 

Muppz

Active member
Feedback
6 (100%)
Credits
362CR
crickey, not seen one of those since God was a lad.

last time I saw one of those was when I was still training in the 80's and only then because we were throwing them out!
 

P-Man

International man of mystery
Feedback
4 (100%)
Credits
1,273CR
I dont know how you would 'test' a component using a substitution box...

They're ok for maybe teaching in a class, but there's no precision to them with the croc clip leads, the capacitance and resistance would be fairly changeable. ok for making your own circuits to light up lamps with a 9v battery, but not sure you can do much else with them :)

i'd say move on...
 

forcefulfil

EDOT King
vacBacker
Feedback
17 (100%)
Credits
1,674CR
maplin do a lot of gear for testing caps/transistors
but my multi meter does most too and monitors/power supply i usually re-cap anyway while im rebuilding it

forcefulfil2013-02-13 17:06:58
 

Muppz

Active member
Feedback
6 (100%)
Credits
362CR
We used them more for investigating faults than fault finding. when we were being taught basic tranny 1,2 & 3 stage amps we used one briefly in one lesson to observe differences in the waveforms caused by different R & C values by tagging these into circuit.

I can't see how they would be used for fault finding either unfortunately
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
Sorry I probably wasn't very clear in my original post. I didn't mean for fault finding as such, I meant more as a way of temporarily substituting capacitors or other parts etc that you suspect are faulty, so you can re-test with a known working part, and as a check that you are on the right track to fixing the problem

So, as Pman pointed out, "test" is probably not the right word that I used

Purity2013-02-14 13:23:53
 
Top