Hope you can help?
I'm having sync issues with various boards, mostly Konami and Nintendo.
My setup is a Jamma edge connector wired straight to an arcade switcher, and the RGB is wired directly to a 9 pin D connector that plugs into a 1084S monitor. The monitor is in analogue mode so inputs are Red, Green, Blue, Ground and CSync.
Jamma boards on this look perfect, and I also tried a Universal PCB and this was fine. It's just other boards, like Konami and Nintendo I'm having issues with. I believe these have narrower syncs, and this is the problem?
There is a hold pot on the monitor but this doesn't really help much.
I was thinking of cutting into the sync line and adding a 5k pot and capacitor to help make the narrow syncs more acceptable on the monitor. Something like this (apologies for the crude drawing)
What do you guys think? Would this fix my issues?
I'm having sync issues with various boards, mostly Konami and Nintendo.
My setup is a Jamma edge connector wired straight to an arcade switcher, and the RGB is wired directly to a 9 pin D connector that plugs into a 1084S monitor. The monitor is in analogue mode so inputs are Red, Green, Blue, Ground and CSync.
Jamma boards on this look perfect, and I also tried a Universal PCB and this was fine. It's just other boards, like Konami and Nintendo I'm having issues with. I believe these have narrower syncs, and this is the problem?
There is a hold pot on the monitor but this doesn't really help much.
I was thinking of cutting into the sync line and adding a 5k pot and capacitor to help make the narrow syncs more acceptable on the monitor. Something like this (apologies for the crude drawing)
What do you guys think? Would this fix my issues?