Tehkan World Cup Conversion

frothmeister

Active member
vacBacker
Feedback
56 (100%)
Credits
886CR
Fantastic stuff Ben. Keep posting the updates dude.......I can't wait to see this up and running TWC
smiley20.gif
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
Original PCB up and running:

39744282445_b8c3929386_c.jpg


The inputs are going to be a pain to test because obviously you need a trackball and the kick buttons don't work unless you are running, so I'll have to wire up a track ball for both sides to make sure it is working correctly

Also 19" monitor is sorted ready to go into the cab
smiley20.gif
 

jacaba

Newbie
Credits
0CR
Purity said:
The sideart and CPO artwork has been vectored by another member singyuk, so it's not really for me to decide whether it should be distributed.

Myself and Big Phil are paying for the monitor bezel to be vectored so giving that away for free also might be a bit of an issue

I have searched for a long time without success the arts of the tehkan world cup. I'm very interested in getting the arts of these sideart and CPO artwork.

Is there a way to get them even if you are paying an amount for them
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
jacaba said:
I have searched for a long time without success the arts of the tehkan world cup. I'm very interested in getting the arts of these sideart and CPO artwork.

Is there a way to get them even if you are paying an amount for them

You will need to ask singyuk about the sideart and cpo, as they are his files
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
T-moulding is now on the cabinet
smiley20.gif


Virtvic has been helping me out with the correct screw US sizes, so I can tap the threads and bolt the CP to the cabinet. It uses a wacky 10-24 bolt
smiley5.gif


Purity2018-03-20 17:21:21
 

jacaba

Newbie
Credits
0CR
Purity said:
jacaba said:
I have searched for a long time without success the arts of the tehkan world cup. I'm very interested in getting the arts of these sideart and CPO artwork.

Is there a way to get them even if you are paying an amount for them

You will need to ask singyuk about the sideart and cpo, as they are his files

thank you, I going to try to contact with him
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
-Coin doors back on properly
-T-moulding done
-Control panels bolted down

Definately taking shape now
smiley2.gif


40305367584_1d4076583b_c.jpg


Many thanks to Virtvic for helping me out with the US sizes of bolts required for the cabinet

I had to re-tap the threads as they had been damaged by someone putting in the wrong size screws. Probably UK screws in US holes
 

jacaba

Newbie
Credits
0CR
great work , purity. You arcade going to be incredible.
could you detail the measurements of the cabinet? I'd like built the cabinet by myself
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
There are some measurements in the manual:

http://www.arcadecollectors.co.uk/techinfo/arcade-manuals/

If you need any other measurements I cannot really help because my cabinet is a Dunk Shot cabinet and the size is different to that of the original Tehkan World Cup. This is why I've had to have custom control panels etc
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
Did a bit more on this tonight. Removed the double sided tape on the monitor shield. This still needs a good polish with Novus as it has quite a few scratches on. Hopefully this will get those out

I've placed the artwork on the shield and the outer bezel on the shelf above. I probably need to add some small shelves so make sure this is flat rather than being floppy in the middle and it *should* look like the bezel is floating....need to have a think about this

The outer bezel is usually stuck onto the glass but because the glass is curved it makes it very difficult. This was the next best thing I could think of.

Here's a couple of pics with the glass off

39915791360_c0081e379b.jpg


40824186725_9d450d07bd.jpg

Purity2018-04-26 22:32:42
 

Purity

The Oracle
vacBacker
Feedback
17 (100%)
Credits
2,999CR
I cut out a rigid plastic correx frame to put under the outer bezel and it now looks how I wanted it with a floating effect
smiley1.gif


27893493328_2a1285f653.jpg

Purity2018-04-28 19:36:29
 
Top