This si the way the streching works with scarts and consoles
Pin 8 as i mentioned earlier is teh aspect ratio pin and its needs to be set like this
| Pin 8 |
|
Status & Aspect Ratio up
- 0–2 V ? off
- +5–8 V ? on/16:9
- +9.5–12 V ? on/4:3
|
|---|
so to disable any auto switching and leave it for you to do it yourself manually just completely disconect any wire on Pin 8
for 16:9 mode you need to send it a vlotage of 5-8Volts (5Volts is usually perfect)
for 4:3 mode you need to send it 9.5-12Volts (12Volts is usually perfect)
Bear in mind most Console cables have 5Volts on that pin becasue most people prefer a streched screen using a wide screen LCD.
silverfox07862015-09-17 18:27:49