I've done a few of these where decent monitors were not available or too expensive to justify using in a project cab
Decase one you may have to make a new mounting board or mounting brackets depending on the cab as the screen profile will most likely be different
You will also have to provide power to the scart pin to auto switch to the av channel when you power on
If your running a pc the retro tink VGA to scart on ebay is not bad
If your running PCBs you will need a gonbes to convert cga to VGA and then the VGA to scart converter
There may be Easyer ways but thats how I have done them in the past
The naomi has a Sony TV in it
robotech2021-12-14 16:09:06