petercasino said:None of the LEDs lit during or after the ram test. The next test ran and led 3 blinked twice. At what point should the LEDs light during the ram test?
LED 3 blinking twice means it's skipped RAM diagnostic and gone straight to CMOS test (which has passed). Pretty much at the end of any further advice I can offer.
This is a long shot ..... try running the cab in cocktail mode, then start a 2 player game. See what happens when it's player 2's turn.
You need to remove a jumper on the I/O board (controls) to switch to cocktail mode. See: link