tb lilley said:Looks like the AR board has already been subjected to some pretty poor repair work. -5 was probably a problem before, hence 7905 previously replaced. Just desolder it. Then drop it back in so hole lines up with hole on heatsink. Should then be screwed in placed. Soldered in place. Legs trimmed to fit. That said, may not even be the 7905 that's at fault .... Worth checking schems for what else is in the -5 circuit. Not much is my guess.
tb lilley said:Looks like the AR board has already been subjected to some pretty poor repair work. -5 was probably a problem before, hence 7905 previously replaced. Just desolder it. Then drop it back in so hole lines up with hole on heatsink. Should then be screwed in placed. Soldered in place. Legs trimmed to fit. That said, may not even be the 7905 that's at fault .... Worth checking schems for what else is in the -5 circuit. Not much is my guess.
trm said:Pin 24 on many size EPROMs is an address line so if it was fully disconnected and floating you'd be very likely to get semi random data returned because the resulting address would be different to what the game was intending.