gridrunner
Ex-lurker!
Hello everyone,
I'm trying to get a Taito BB board working fully and I'm running into some difficulty. Can anyone shed any light on these issues:
1. Sound
I'm getting no sound and figured out (well P-Man advised) I need -5V. This is supplied by my cabinet PSU but not by my harness. I've added this voltage, but whenever it's applied I get a lot of interference/wavy lines on the screen - looks rather like a grounding problem. Do I need additional grounding for the -5V supply?
I haven't yet checked whether I'm getting sound or that the PSU can supply the necessary current. I was stopped in my tracks by the failure to get free play (2) and no coins!!
2. Freeplay
I can't find a free play setting. The Romstar manual mentions the fact you can run without a coin meter by bridging a jumper at jp7. I tried this to no effect, but the jumper configuration is a bit odd with 3 spots - I may have bridged the wrong direction:
x
xx
Has anyone had one of these boards on free play?
After battling the blasted area51 cab for ages, the last thing I wanted was to be fannying about with a board that should have just been able to slot into a jamma harness and go (it has a hard wired adapter)
HELP!!
thanks
stu
gridrunner2011-03-10 09:58:13
I'm trying to get a Taito BB board working fully and I'm running into some difficulty. Can anyone shed any light on these issues:
1. Sound
I'm getting no sound and figured out (well P-Man advised) I need -5V. This is supplied by my cabinet PSU but not by my harness. I've added this voltage, but whenever it's applied I get a lot of interference/wavy lines on the screen - looks rather like a grounding problem. Do I need additional grounding for the -5V supply?
I haven't yet checked whether I'm getting sound or that the PSU can supply the necessary current. I was stopped in my tracks by the failure to get free play (2) and no coins!!
2. Freeplay
I can't find a free play setting. The Romstar manual mentions the fact you can run without a coin meter by bridging a jumper at jp7. I tried this to no effect, but the jumper configuration is a bit odd with 3 spots - I may have bridged the wrong direction:
x
xx
Has anyone had one of these boards on free play?
After battling the blasted area51 cab for ages, the last thing I wanted was to be fannying about with a board that should have just been able to slot into a jamma harness and go (it has a hard wired adapter)
HELP!!
thanks
stu
gridrunner2011-03-10 09:58:13