Initial D

IDCHAPPY

IDCHAPPY

KANFU Master
vacBacker
Feedback
9 (100%)
Credits
1,523CR
I've been doing the same
smiley36.gif
only in my head though
smiley9.gif
 
A

airicouk

Newbie
Credits
22CR
Alpha1 said:
You didn't get a card reader either?... Doh!!! I am chasing the other for aircouk - i'll get on it for you also. It might be a case I need to go up there.
Click to expand...

Thanks Alpha1 for your help on this!

Also does anyone know how to fix the adjustment in the ID cab seats? my missus is rather short and the seat keeps on moving backwards when she plays...
smiley36.gif


I'm sure there was a lever to adjust when I played them years ago... might be a case of taking it apart to see whats broken or missing.
 
S

simon325836

Active member
Credits
47CR
I just bought a new plate on ebay with the locking lever...

I take it you will need to find one or ram a screwdriver in the broken one to lock it
 
IDCHAPPY

IDCHAPPY

KANFU Master
vacBacker
Feedback
9 (100%)
Credits
1,523CR
Alpha1 said:
You didn't get a card reader either?... Doh!!! I am chasing the other for aircouk - i'll get on it for you also. It might be a case I need to go up there.
Click to expand...

Did you manage to get anywhere on this dude ?
smiley1.gif
 
IDCHAPPY

IDCHAPPY

KANFU Master
vacBacker
Feedback
9 (100%)
Credits
1,523CR
Has anyone got some pictures of how the card reader bolts on to the coin tower? the holes for my card reader don't match up at all, I have one bolt holding the card reader in place
smiley5.gif
 
Vamino

Vamino

Insert coin(s)
vacBacker
Feedback
22 (100%)
Credits
2,646CR
initial_D_card_reader_bracket.jpg


I met up with Mo today (a really nice guy) and bought a coin tower with a single type card reader bracket attached, heres a pic of my old one, ignore the random sticky substance that was there when I removed the card reader.
smiley3.gif


Can you take a photo of the back of your cab where the card reader loom plate is please, it should have a hole and 2 screw holes where the plate attaches. swapping from a twin type card reader bracket to a single type bracket, the place where the card reader connects is different.

Cheers.
Vamino2013-11-05 22:43:28
 
Outrun2

Outrun2

Colonel Outrun
Feedback
5 (100%)
Credits
1,153CR
IDCHAPPY said:
Has anyone got some pictures of how the card reader bolts on to the coin tower? the holes for my card reader don't match up at all, I have one bolt holding the card reader in place
smiley5.gif
Click to expand...

There should be a bracket inbetween the coin tower and the card reader - this makes the flat surface for the card reader to attach to.

I'm guessing you have a UK card reader..?
 
Vamino

Vamino

Insert coin(s)
vacBacker
Feedback
22 (100%)
Credits
2,646CR
cointower_bracket.jpg


card_reader.jpg


As Gary said, the coin tower has an extra bracket on top of it that levels the surface for the card reader to mount on. The pics are not that great tbh, but hope they help.

If anyone has a single cabinet a pic of where the card reader loom attaches to, that would be helpful to me.

Cheers.
 
Outrun2

Outrun2

Colonel Outrun
Feedback
5 (100%)
Credits
1,153CR
This is the back of my initialD single cab. Single cabs have a box and plastic pipe covering the looms that run from cab to coin tower. This shows the box (to the left) with cover removed and AC plate (to the right) as I know people often want to see this too. The card reader loom is on the yellow connector.

Remember, this is a single cab so the AC plate doesn't have a link out the a slave or master cab like a twin would..

iD_rear_wiring.jpg
 
IDCHAPPY

IDCHAPPY

KANFU Master
vacBacker
Feedback
9 (100%)
Credits
1,523CR
garysmith2001 said:
IDCHAPPY said:
Has anyone got some pictures of how the card reader bolts on to the coin tower? the holes for my card reader don't match up at all, I have one bolt holding the card reader in place
smiley5.gif
Click to expand...

There should be a bracket inbetween the coin tower and the card reader - this makes the flat surface for the card reader to attach to.

I'm guessing you have a UK card reader..?
Click to expand...

Thanks dude, sorry I missed this one, yeah I think your right I'm missing that bracket
smiley18.gif
. Explains why my card reader is pointing at an upwards angle bugger
smiley36.gif
 
Vamino

Vamino

Insert coin(s)
vacBacker
Feedback
22 (100%)
Credits
2,646CR
garysmith2001 said:
This is the back of my initialD single cab. Single cabs have a box and plastic pipe covering the looms that run from cab to coin tower. This shows the box (to the left) with cover removed and AC plate (to the right) as I know people often want to see this too. The card reader loom is on the yellow connector.

Remember, this is a single cab so the AC plate doesn't have a link out the a slave or master cab like a twin would..

iD_rear_wiring.jpg
Click to expand...

Thanks again Gary, I dunno what I'd do without all your help!
smiley20.gif


Looks like I need to get that box then, the Coin tower I bought off Mo has the cabling but I didn't realise I needed a back box as well.

I prefer the look of a single cab to be honest, it's so much cleaner looking and it means I can push the cab right up to the wall. If I can find someone who can help regarding the Sega CF reader I bought that would sort me out until I can get the metalwork sandblasted + powder coated. I also need to find a Model 3 dashboard for OR2 SP and a few bits+artwork to make it nice and fresh looking....I've already spent more than I first thought I would.
smiley36.gif


I also have a slight problem where the steering is a bit jittery, it's very noticable in the steering service menu, I'll take a movie of what I mean at a later date. I've tried replacing the pot but that didn't help, one for another day I suppose as it is playable but not 100%.

Cheers.
 
You must log in or register to reply here.
Top